TIMER

5 Adjust the volume.

The source sound will play at the volume level set in this step when the power is turned on by the timer.

If the volume level is set to 17 or higher, however, it will automatically be set to 16 when the power is turned on.

6 Prepare the source.

To listen to a CD, load the disc to be played first on tray 1.

To listen to a tape, insert the tape into deck 1 or 2.

To listen to the radio, select the band and tune in to a station.

 

7 Press POWER to turn off the power.

 

When the timer-on time is reached, the unit turns on and

 

begins play with the selected source.

 

You can change the source that was selected in step 1 by pressing

 

one of the function buttons before pressing ENTER or ain step

 

3.

 

 

To check the timer setting

 

Press TIMER.

 

The timer-on time, the selected source, and the duration for the

 

timer-activated period will be displayed for 4 seconds.

 

To change any of the previous setting

 

Carry out from step 1.

 

However, if you do not change the timer-on time, in step 3 just

 

press ENTERtwice and continue from step 4.

 

To cancel the timer standby mode temporarily

 

Press TIMER repeatedly so that 5disappears.

 

To restore the timer standby mode, press again to display 5.

 

Using the unit while the timer is set

 

You can use the unit normally after setting the timer.

 

Before turning off the power, carry out step 5 and 6.

 

• Timer playback and timer recording will not begin unless the

 

power is turned off.

 

• Connected equipment cannot be turned on and off by the built

 

in timer of this unit. Use an external timer.

 

TIMER RECORDING

 

Timer recording is applicable for TUNER and VIDEO/AUX (with

 

an external timer) sources only.

 

Press either TUNER BAND or VIDEO/AUXto select a source,

 

then press TIMER repeatedly until 5 REC appears on the

4 Within 4 seconds, turn MULTI JOG to select the

display.

Within 6 seconds, carry out the steps of “SETTING

THE TIMER” from step 3 and insert the tape to be recorded on

duration for the timer-activated period.

into deck 2 after step 6.

The duration can be set between 5 and 240 minutes in 5

 

 

minute steps.

 

 

for g.is also available in place of MULTI JOG

 

 

 

• If the timer recording is done with the economizing mode (page

 

6) set to “ECO ON” or “ECO AUTO” and the power turns off, the

 

dimmer mode will be set to “DIMMER 3” and the volume level

 

will be 0 (minimum level) the next time the power is turned on.

 

• You cannot use the timer function to record from a CD or tape.

 

• You can check the timer setting by pressing TIMER even while

 

the power is off. In this case, if you press ENTER or awithin 4

 

seconds,youaftercanpressingenter theTIMERtimer setting

mode and change the previous setting.

turn MULTI JOG to designate

The unitduratiocan bewillturbe automaticallynedon setaspecifiedafter 4 secondstime ever.It willy withydathe

TIMER RECORDING

En