SETTING A NEW EQUALIZATION CURVE MANUALLY
The equalization curve can be customized to suit your preference.
1Press GEQ, followed by ENTER within 4 seconds.
Your customized setting will be based on the currently selected curve. To select a different curve to work on, turn MULTI JOG before pressing ENTER.
The display will be switched to read “GEQ LOW.”
2Within 8 seconds, turn MULTI JOG to adjust the level of the lowest frequency.
3Press ENTER to let “GEQ HIGH” show.
The highest level frequency indicator flashes for 8 seconds.
4Within 8 seconds, turn MULTI JOG to adjust the level of the highest frequency.
The frequency level indicators of between the lowest and the highest are adjusted accordingly.
NOTE
If you do not store your customized equalization curve, it will be lost when you switch to a different curve or press GEQ. To store the new curve, see below.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo plug (ø 6.3 mm, 1/4 inch).
No sound is output from the speakers while the headphones are plugged in.
•When the headphones are plugged in, the DSP Surround or the Dolby Pro Logic system is cancelled. The Dolby Digital system switches to the 2ch STEREO mode.
Sound adjustment during recording
The VOLUME control has no effect on recording, while the BBE affects recording.
STORING THE NEW EQUALIZATION CURVES
Up to 5 customized equalization curves can be stored as the manual modes M1 - M5.
1 Go through steps
The created curve is displayed for 8 seconds.
2Within 8 seconds, press ENTER.
“M1” flashes on the display for 8 seconds.
•If this step is not completed within 8 seconds, press GEQ first to display “GEQ ON”. Then within 4 seconds press ENTER repeatedly until “M1” flashes.
3Within 8 seconds, turn MULTI JOG to select one of the manual modes M1 - M5 to store the curve.
4Within 8 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual modes M1 - M5 within 4 seconds.
10 ENGLISH
