SETTING THE SLEEP TIMER

TIMER

 

SETTING THE SLEEP TIMER

SETTING THE TIMER

The unit can be turned off automatically at a specified time.

Use the remote control.

1Press SLEEP.

2Within 4 seconds, press f DOWN or g UP

to specify the time until the power is turned off.

The time changes between 5 and 240 minutes in 5-minute steps.

MULTI JOG is also available in place of f or g.

Specified time

The unit can be turned on at a specified time every day with the built-in timer.

Preparation

Make sure the clock is set correctly.

1Press one of the function buttons to select a source.

2Press TIMER repeatedly until “ ” appears on

the display.

Time and audio source name flash alternately.

To check the time remaining until the power is turned off

Press SLEEP once. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press SLEEP twice so that “SLEEP oFF” appears on the display.

3Within 6 seconds, turn MULTI JOG to designate

the timer-on time, then press ENTER or a.

Turning MULTI JOG changes both the hour and the minute. for gis also available in place of MULTI JOG. Holding these buttons down will vary the time rapidly.

4Within 4 seconds, turn MULTI JOG to select the

duration for the timer-activated period.

The duration can be set between 5 and 240 minutes in 5- minute steps.

f or g is also available in place of MULTI JOG.

The duration will be automatically set after 4 seconds. It will also be set if ENTER or a is pressed within 4 seconds after step 4.

28 ENGLISH

Page 28
Image 28
Aiwa NSX-DS8 manual Setting The Sleep Timer, Setting The Timer, 1Press SLEEP, 2Within 4 seconds, press f DOWN or g UP