POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the Dolby Digital or the Dolby Pro Logic system, it is important to position the speakers properly. Refer to the following illustration to find out the best location in your room.
L&R: Front speakers
C: Center speaker
Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.
LS&RS: Surround speakers
Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3.2 feet) above ear height.
NOTE
Sound output from the center and the surround speakers is only available when the Dolby Digital system, the Dolby Pro Logic system, or the DSP Surround system is activated with the appropriate setting.
To mount the surround speakers on the wall
Mount each speaker on a spot that can hold its weight.
PREPARATIONS
5 Connect the supplied antennas.
Connect the FM antenna to FM 75 Ω terminals and the AM
antenna to AM LOOP terminals.
FM antenna
AM antenna
6 Connect your video equipment (DVD player, LD player, video tape player, etc.).
If your video equipment has an OPTICAL OUT jack;
Connect the AUDIO OUT jacks of the video equipment to the VIDEO1/DVD/AUX jacks of this unit with an optional audio connecting cord with RCA phono plugs (red plug to the R jack, white plug to the L jack).
Connect the OPTICAL OUT jack to the DIGITAL IN OPTICAL (VIDEO 1) jack of this unit with an optional optical connecting cord.
If your video equipment has a COAXIAL OUT jack;
Connect the AUDIO OUT jacks of the video equipment to the VIDEO2/LD/MD jacks of this unit with an optional audio connecting cord with RCA phono plugs (red plug to the R jack, white plug to the L jack).
Connect the COAXIAL OUT jack to the DIGITAL IN COAXIAL (VIDEO 2) jack of this unit with an optional coaxial connecting cord.
NOTE
•Input to the DIGITAL IN OPTICAL jack is selected with the VIDEO1/DVD/AUX button, while input to the DIGITAL IN COAXIAL jack is selected with the VIDEO2/LD/MD button (see “Listening to external equipment”, page 32). Analog connection should thus be made to the input jacks with the corresponding names depending on the type of digital connection, as described above.
The illustration shows the connection to the VIDEO1/DVD/ AUX jacks.
•If your video equipment has both OPTICAL and COAXIAL OUT jacks, choose either connection.
•When connecting an LD player via its
If your video equipment does not have a digital out jack;
Connect the AUDIO OUT jacks of the video equipment to the VIDEO1/DVD/AUX jacks of this unit with an optional audio connecting cord with RCA phono plugs (red plug to the R jack, white plug to the L jack).
7 Connect the television to the video equipment.
Refer to the Operating Instructions of the connected equipment for details.
8 Connect the AC cord to an AC outlet.
The DEMO will begin when the AC cord is plugged into an AC outlet for the first time. To deactivate the DEMO, set the clock.
En
ENGLISH 5
