DUBBING A TAPE MANUALLY
NOTE
•Set the tape to the point where recording will start.
•The reverse mode is automatically set to p.
Note that recording will be done on one side of the tape only.
1Press TAPE/DECK 1/2.
2Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded on facing out from the unit.
3Press TAPE/DECK 1/2 to select deck 1.
“TP 1” is displayed.
4Press w REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press s.
DUBBING THE WHOLE TAPE
This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed.
NOTE
•Dubbing does not start from a point halfway in the tape.
•The reverse mode is automatically set to [.
1Press TAPE/DECK 1/2.
2Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded on facing out from the unit.
3 Press SYNC DUB once or twice to start recording.
1 For recording at normal speed, press it once to display
2 For recording at high speed, press it twice to display
12
The tapes are rewound to the beginning of the front sides, and recording starts.
To stop dubbing
Press s.
NOTE
Recording does not start if the erasure prevention tab on either side of the tape is broken off.
