LOADING DISCS
2,4 |
| 2,4 | 2,4 |
|
| ||
1 | Play deck | Record deck | 1 |
6STANDBY/ON |
| ||
|
|
1Press POWER on the front panel or remote control.
6STANDBY/ON will turn green, indicating that the unit is on and functioning.
2Press appropriate z on the front panel or remote control to open the desired deck.
3Load a disc with the label side up.
The play deck may not play the
zOPEN/CLOSE
4Press appropriate zto close the desired deck.
You can also close the deck by gently pressing on the outside of the disc tray.
NOTE
•Do not attach any seal or label to either side (the recordable side or the labeled side) of a
•Do not use irregular shape CDs (example:
•When loading an
•Do not place more than one compact disc on one disc tray.
•Do not tilt the unit with discs loaded. Doing so may cause malfunctions.
INFORMATION DISPLAY
When the disc is loaded, the type or status of disc is displayed as follows:
Conventional audio CD, finalized
"TOC" will flash while the unit reads the disc's Table Of Contents information.
Table Of Contents
The total number of tracks and the total time of all tracks will be displayed. "CD" will also light to indicate that a conventional audio CD is in use.
"CD" lights
Total number of tracks | Total time of all tracks |
"OPC" will be displayed once "TOC" has been read. OPC determines the intensity and duration of the recording laser beam that is best for the currently loaded disc.
Optimum Power Control
The total number and total time of all tracks that have already been recorded will be displayed, and the appropriate indicator will light if a
"CD
Total number of tracks Total time of all tracks
Computer data disc
"DATA" and "DISC" will be displayed alternatively when there is an error. Data discs will not play and may not be recorded or dubbed in this unit.
12 ENGLISH