PROGRAMMED PLAYBACK
•You can program up to 20 tracks and play them in any order.
•You can program tracks only in stop mode.
1
2,4
3
PRGM CHECK 
CLEAR
5
4
1In stop mode, press CD/SEL or
2Press PRGM.
"PROG" will light and "00 00:00" will be displayed.
"PROG" ights
3Press the numbered button to program a track.
When selecting a two digit track number, the second number must be entered within 10 seconds after the first number pressed.
As each track is entered, the display will flash three times, alternating between two displays.
Programed track | Program number | ||||||
number |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5Press cto start programmed playback.
The program will remain in the unit's memory until the disc is removed or the unit is turned off.
To check the program
To scroll through a program list, press PRGM CHECK repeatedly. Each press of the button will move through the tracks that have been programmed.
To add a new track
1Press PRGM CHECK repeatedly until "00" is displayed.
2Press a numbered button to add a new track.
To delete a track in the program
1Press PRGM CHECK repeatedly to select the track you wish to delete.
2Press CLEAR.
The selected track will be deleted and programmed tracks with higher numbers are decreased by one.
To change the program
1Press PRGM CHECK repeatedly to select the track you wish to change.
2Press the numbered button.
To clear the program
Press PRGM while the program is playing.
"PROG" will go out on the information display.
In stop mode, simply open and close the disc tray. Whenever a disc is removed or the unit is turned off, the program is cleared.
Last track | Total playing time of |
programmed | programmed tracks |
4Repeat step 3 to program other tracks.
•Tracks may also be added using r and t to locate the track, and the PRGM to enter that track to the programmed sequence.
22 ENGLISH
