Aiwa XC-RW700 manual Finalization, Unfinalization

FINALIZATION

Finalization completes the recording of a disc so that it can be played in other machines.

Precautions

•Once a CD-R disc is finalized, the disc cannot be unfinalized.

•A CD-RW disc can be unfinalized.

•During the finalization process, never switch the power off, or the disc may be damaged.

•Once started, the finalization process cannot be aborted.

•Dust or scratches on a disc may prevent it from being finalized successfully.

•The finalization process time depends on the disc and number of tracks.

•During the finalization process the record deck will not accept any operating commands.

	3
	2
	3
2	3 1

1Load the CD-R/RW disc on the record tray.

2Press FINALIZE on the front panel or remote control.

"FINALIZE" will begin flashing.

3Within 3 seconds, press con the record deck.

Alternatively, press CD-R/RW/SEL and then con the remote control.

"FINALIZE" will stop flashing and remain lit.

•The finalization process will take between 60 and 90 seconds, depending on the length of material recorded on the disc.

•During the finalization process the record deck will not accept any operating commands.

When the finalization process is complete "FINALIZE" will go out, and "CD" will light as an indication that the disc is now playable on other players.

"CD" lights

UNFINALIZATION

To keep the material that is already recorded on a CD-RW disc and to add an additional track and erase an individual track, you must first unfinalize the disc.

	3
	2
	3
2	3 1

1Load the CD-RW disc on the record tray.

2Press ERASE on the front panel or remote control repeatedly until "TOC" is displayed.

"ERASE" will begin flashing.

3Within 3 seconds, press con the record deck.

Alternatively, press CD-R/RW/SEL and then con the remote control.

"ERASE" will stop flashing and remain lit.

When the unfinalization process is complete, "ERASE" will go out, and "CD-RW" will light.

18 ENGLISH