Programmed playback
Plays back up to 30 selected tracks in programmed order.
1Hold down SHIFT and press PROGRAM on the remote control in stop mode.
"PRGM" flashes on the display.
2Press the numbered buttons on the remote control to program a track.
The selected track number lights up on the display.
3Repeat step 2 to program other tracks.
The total number of selected tracks and total playing time will be displayed.
4Press cto start play.
The track number for the current track flashes on the display.
•During programmed playback, you cannot select a track with the numbered buttons. "Can’t USE" is displayed when you try to select a track .
•It is impossible to play a selected set of tracks in random order.
•If the total playback time of the program exceeds 99 minutes and 59 seconds, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "-
•You cannot program more than 30 tracks. "FULL" is displayed.
To check the program
Press f or g repeatedly in stop mode. The track number and program number are displayed in succession.
To clear the program
Press sin stop mode. "PRGM" disappears on the display.
To add tracks to the program
Repeat step 2 before starting playback. The tracks are added to the end of the program.
To change the programmed tracks
Clear the program and repeat all the steps again.
Notes on CDs
•Do not place more than one disc.
•Do not tilt the unit with a disc inserted.
•The unit may not play
•Do not attach adhesive label to either side of
•Do not load an unrecorded
•Do not use
En
11