PREPARATIONS
Connection
Plug in the AC power cord to the AC outlet after all other connections are made.
1 Connect the speaker cords to the speakers. Connect the amber cords to the + terminals and the silver
3Connect the supplied antennas.
Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP jack.
AM antenna
FM antenna
Remote control
While sliding the latch, pull out the battery holder from the bottom of the remote control. Place the supplied battery on the battery holder with correct polarity. Finally, insert the holder back into position.
En
cords to the – terminals.
CR2025
2Connect the speakers to the main unit.
Connect the right speaker to the SPEAKERS R terminals and the left to the SPEAKERS L terminals. The amber speaker cords go to the )terminals.
4Connect the AC power cord to an AC outlet. When the AC power cord is connected to an AC power outlet for the first time, DEMO appears on the display. To deactivate the DEMO, press DEMO/ECO and the clock will flash on the display. For setting the clock, see page 9.
Speakers
•Do not
•Do not leave objects generating magnetism or objects affected by magnetism near the speakers.
Antennas
Keep antennas away from metallic objects, electrical equipment and cords.
FM antenna: Extend fully in a
AM antenna: Rotate to find the best reception.
•Replace the battery with new one when the operational distance between the remote control and main unit becomes shorter.
•Remove the battery if the unit is not going to be used for an extended period of time.
•The remote control may not operate if it is used under intense sunlight or if its line of sight is obstructed.
Caution!
•Do not keep the battery near metallic objects such as rings, bracelets, and keys. It may cause the battery to short circuit.
•After removing the battery, be sure to keep it out of reach of children. In case it is swallowed, consult a doctor immediately.
4