Setting the clock
1Hold down SHIFT and press CLOCK on the remote control.
When the unit is turned off, you can also press a or
ENTER.
2Press for gto set the time.
Each press changes the time in
If for gis not pressed within 4 seconds, setting is canceled.
3Press aor ENTER.
The time display stops flashing and the clock starts from 00 seconds.
To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote control. The time will be displayed for 4 seconds.
To switch to the 24-hour standard
Display the time and press swithin 4 seconds.
With each press, the clock alternates between 12- and 24- hour standard time.
Tip:
In the
If the clock display flashes when the unit is turned off
There has been a power interruption. Reset the clock.
SOUND ADJUSTMENTS
Equalizer
Selects a sound equalization curve to match the music type.
Press EQ (EQ/QSURROUND on the remote control) repeatedly to select one of the three equalization curves.
-ROCK: Powerful sound emphasizing treble and bass
-POP: More presence in the vocals and midrange
-JAZZ: Accented lower frequencies for
-EQ OFF: Equalizer effect is canceled.
T-BASS
Emphasizes low frequencies for a powerful sound.
Press
•If the sound becomes distorted with the
Q SURROUND system
The Q SURROUND system built into this unit uses only two speakers at the left and right to create an atmosphere that sounds as if you are surrounded by two front speakers and two rear speakers.
Hold down SHIFT and press EQ/QSURROUND on the
remote control.En “ON QSURROUND” will flow from right to left.
To cancel the Q SURROUND effect
“OFF QSURROUND” flows from right to left and the “QSURROUND” indicator goes off.
Tips:
•The Q SURROUND system does not work in monaural mode.
•When the Q SURROUND system is on, the sound may be distorted at higher volumes. If this happens, turn the volume down.
9