Aiwa XR-MG9 Adjustments Before Operation, Power, Volume, Demo, ECO mode, Turning the unit on

ADJUSTMENTS BEFORE OPERATION

POWER			VOLUME UP/
6STANDBY/ON		s	DOWN
DEMO/ECO	a	f,g
			CLOCK	TUNER/BAND,
				AUX, CD
En			T-BASS	EQ/
			SHIFT	QSURROUND
			f,g	ENTER
			aSET	VOLUME
			POWER	(N,M)
	T-BASS
			EQ
TUNER/BAND			zOPEN/CLOSE

When the power economizing mode is activated

"GOOD-BYE" is displayed for 4 seconds, and everything on the display clears.

Only the red indicator on the POWER button lights to show that power is being supplied to the unit.

Standby power consumption

When the power economizing mode is activated: 1.0 W

When the power economizing mode is deactivated: 12.0 W

Power

Turning the unit on

Press POWER 6STANDBY/ON (POWER on the remote control).

Alternatively, press TUNER/BAND (AUX or CD on the remote control). Playback will start automatically if a disc is inserted.

Turning the unit off

Press POWER 6STANDBY/ON again.

The unit goes into standby.

Volume

Press VOLUME (UP or DOWN) (VOLUME (N,M) on the remote control).

Adjust from 0 (minimum) to 30 and MAX (maximum).

Tip:

Volume level setting is retained during power-off standby. If the unit is turned off with the volume set to 17 or more, it is automatically turned down to 16 the next time the unit is turned on.

DEMO

If the clock has not been set, a DEMO appears on the display when the unit is turned off.

To deactivate the DEMO

Press DEMO/ECO. The clock flashes. For setting the clock, see page 9.

ECO mode

Reduces power consumption with the following operations.

After clock is set, this unit allows you to regulate its power consumption by displaying nothing on the display while the power is off. This is called the power economizing mode.

Press DEMO/ECO while the unit is turned on.

Each press of this button changes the display status as follows:

1ECO ON: power economizing mode is activated.

2ECO OFF: power economizing mode is deactivated.

8