REMOTE CONTROL | BEFORE OPERATION |
Inserting batteries
Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.
POWER 6STANDBY/ON
ECO
ENTER
MULTI
JOG
PREPARATIONS
When to replace the batteries
The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.
To use SHIFT on the remote control
Buttons 1 have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the button while pressing SHIFT.
To use FUNCTION on the remote control
FUNCTION substitutes for the function buttons (TAPE/DECK 1/2, TUNER/BAND, VIDEO/AUX/PHONO, CD) on the main unit. Each time FUNCTION is pressed, the next function is selected cyclically.
1
SHIFT FUNCTION
NOTE
•If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.
•The remote control may not operate correctly when:
-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight.
-Other remote controls are used nearby (those of a television, etc.).
To turn the power on |
|
Press one of the function buttons (TAPE/DECK 1/2, TUNER/ |
|
BAND, VIDEO/AUX/PHONO or CD). |
|
Playback of the inserted disc or tape begins, or the previously |
|
tuned station is received (Direct Play Function). |
|
POWER is also available. |
|
When the unit is turned on, the disc compartment may open and |
|
close to reset the unit. |
|
To turn the power off |
|
Press POWER 6 STANDBY/ON |
|
Illumination guides |
|
Whenever POWER or one of the function buttons is pressed, |
|
the buttons for the selected operation light up or flash. |
|
Example: When CLOCK is pressed, aSET, fand glight |
|
up as a guide to setting the current time. |
|
To change the brightness level of the display | En |
1Press ECO twice so that “DIM MODE” is displayed.
2Within 4 seconds, press ENTER.
3Within 4 seconds, turn MULTI JOG to select the dimmer mode as below.
“DIM OFF” mode is the brightest and “DIMMER 3” mode is the dimmest.
In “DIMMER 3” mode, the spectrum analyzer, and the button illumination light off in addition.
4Within 4 seconds, press ENTER to set the selected mode.
ENGLISH 5