APARAREL REMOTE
CONNECTEUR PARALLÈLE DE COMMANDE À DISTANCE CONTROL REMOTO EN PARALELO
|
|
|
| 7 | 6 |
|
|
GND | FORWARDTRACK | PLAY | 3 | 8 | 1 | REC | STOP |
TRACKMANUALNO WRITE | BACKTRACK | PAUSE | |||||
|
|
|
| 5 | 4 |
|
|
|
|
|
| 2 |
|
|
|
B | 1 | 2 |
3 |
FADER | TRACK NO. | 4 |
WRITE |
REPEAT | 2 |
|
4
1 2 3
1
MENU
2
3 | SKIP ID |
SET CLEAR
4
38
A8 pin parallel remote control input jacks (DIN 8 pin) By connecting the circuit shown at the left, remote control operation of this unit is possible with external switches. The parallel remote control has priority over the wireless remote control.
When the same buttons are pressed at the same time on both units, operation with the parallel remote control will have priority.
BTo disable the infrared remote control unit.
Use the MENU to set whether the infrared remote control unit is enabled or disabled.
1Press the MENU button until
2Press the 41 Á¢ (search) buttons to select the IR on (enabled) or IR off (disabled)
•Initial setting is IR on
•When the original setting is changed, a question mark “?” appears on the screen next to the selected option.
3Press the SKIP ID SET button to memorise the setting.
•The question mark “?” is removed from the display and the new setting is memorized.
4Press the 7 button to exit the menu mode.
<PRE1282> En
