Americana Appliances CDR-850 manual Before making digital recordings

3	1		2
	FADER	TRACK NO.	4
		WRITE
	REPEAT		2
4
	1	2	3
1
		MENU
2
3		SKIP ID
	SET		CLEAR
4

MODES OF RECORDING

Before making digital recordings

Several system operations can be customized for versatility in making digital recordings. These operations can be adjusted using the MENU button.

To establish the COPY-BIT (SCMS) setting.

These settings control the number of generations of digital copies that can be made from the recorded disc. Use this function to set whether the disc can be copied unlimited times, once, or not at all. The status of the copy-bit in the incoming digital signal is ignored and the copy-bit setting on the recorded disc is only set by this menu function. Refer to page 70 for further information on SCMS copy protection.

1 Press the MENU button until one of these three “C PERMIT”,“C ONCE”, “C INHIBT” is displayed.

2 Use the 41 Á¢ buttons to select the copy flag setting.

•Copy permit “C PERMIT”

•Copy once “C ONCE”

•Copy inhibit “C INHIBT”

•Initial setting is copy permit.

•When the original setting is changed, a question mark “?” blinks next to the selected option.

3 Press the SKIP ID SET button to memorize the setting.

•The question mark disappears from the display and the new setting is memorized.

4 Press the 7 button to exit the MENU mode.

50

<PRE1282> En