Americana Appliances CDR-850 Erasing CD-RW only, Press the 8 button to start Last Track Erasing

Press the ERASE button.

			1
	2		3	7
	REPEAT
	7		3
	1	2	3
	4	5	6
1	OPEN/
	CLOSE
2	ERASE
3

90

ERASING (CD-RW ONLY)

Last Track Erasing (takes a few seconds. This function is not possible on a finalized

CD-RW.)

1 Load a CD-RW disc which has been recorded on. 2 Press the ERASE button.

ÖThe display panel successively displays “LAST”, “TRACK” and “ERASE?”. Then the function indicator blinks orange indicating that the recorder is in Last Track Erasing standby mode. The display panel displays the number of the track that can be erased and “TRACK” and “ERASE.”

ÖDo not allow more than 8 seconds to elapse after step 2 has been performed before proceeding with step 3.

3 Press the 8 button to start Last Track Erasing.

ÖThe function indicator lights in orange and Last Track Erasing starts.

ÖDuring Last Track Erasing, the number of the track being erased and “**” “TRACK” “ERASE” blink successively.

4 The unit is put in the stop mode when Last Track Erasing is complete.

TOC Erasing (takes approximately 3 minutes for a finalized CD-RW)

1 Load a CD-RW disc that has been recorded and finalized.

2

Ö“TOC”, “ERASE?” are displayed successively.

ÖThe function indicator blinks in orange indicating that the recorder is in TOC Erasing mode.

ÖDo not allow more than 8 seconds to elapse after step 2 has been performed before proceeding with step 3.

3 Press the 8 button to start the TOC Erasing.

ÖThe function indicator lights orange and TOC Erasing starts.

ÖDuring TOC Erasing of a finalized CD-RW disc, “ERS *:**” is displayed showing the time required to complete the process. This time display counts down showing remaining time to completion.

4 The recorder stops when TOC Erasing is completed.

<PRE1282> En