Americana Appliances CDR-850 manual Display Message List, Message Description

DISPLAY MESSAGE LIST

When the words in the messages are listed separately in quotation marks, they are displayed alternately.

Message	Description	Reference page(s)
“OPEN”	The CD tray is being opened.	44
“CLOSE”	The CD tray is being closed.	44
“SET” “UP”	The unit is performing initial calibration for recording. Please wait.
“TOC” “READ”	The unit is reading the TOC (Table Of Contents) from the disc. Please wait.
“1-SYNC”	The unit is standing by for 1-track synchro digital recording. The recording will	54
	start synchronized to the track start of the player.
“AL-SYNC”	The unit is standing by for all-track synchro digital recording. The recordings will	58
	start synchronized to the track starts of the player.
“CANNOT” “SYNC”	This will be displayed when the input selector is not set for digital optical or	54, 58, 60
	coaxial input, or when the format of the digital input is not CD, MD, DAT or DCC.
“MONI”	The unit is monitoring the selected input, as set on the INPUT SELECTOR.	48
“INPUT” “CD”	The unit displays the source it is monitoring (for CD, MD, DAT, DVD or DCC).	48
(MD, DAT, DCC, DVD)
“PMA REC”	Temporary TOC data is being recorded to the discs PMA (Program Memory	54, 60, 62, 64,
	Area). Never turn off the power when this is displayed.	74
“TRACK?”	Appears during the track programming operation to prompt for track number	106
	input.
“SKIP” “SET?”	Appears during the track skip setting operation, to confirm the creation of a skip	82
	ID. If you want to skip a track, select the track with the SKIP ID SET button.
“SKIP” “CLEAR?”	Appears during the track skip clear operation, to confirm the clearing of a skip ID.	84
	If you want to clear the skip designation of a track, select the track with the SKIP
	ID CLEAR button.
“LAST”, “TRACK”,	Erases the last track.	90
“ERASE?”	If you want to erase the last track, press the 8 (PAUSE) button.
“TOC” “ERASE?”	Erases the TOC information on the CD-RW disc. If you want to erase the TOC,	90
	press the 8 button.
“ALL”, “TRACK”,	Erases all tracks.	92
“ERASE?”	If you want to erase all tracks, press the 8 (PAUSE) button.
“ALL”, “DISC”,	Erases the entire disc (initializing the disc).	92
“ERASE?”	If you want to erase the entire disc, press the 8 (PAUSE) button.
“STAND BY”	A record mode button has been selected before the unit is ready to enter a	54
	record mode. Please wait.
“20 --:--”	The source signal that is being input cannot be digitally recorded. Recording will	54
	stop, creating an empty track.
“UnLOCK”	The digital input is selected, but the connections are not correct, or the digital	28
	signal is not being output from the source device. Please check all cabling, and
	source device status.

In addition to the above, other messages are displayed if the unit detects faulty operation during use. For messages not listed above, refer to “Self-diagnostics” on page 118.

112

<PRE1282> En