CONVENIENT FUNCTIONS FOR RECORDING
7 Precautions regarding power interruptions during recording or recording the PMA (Program Memory Area).
Ö Never turn off the power supply while recording.
Ö Be sure to remove the disc before turning off the power to the unit.
Ö If the power is interrupted due to a power failure, or the power cable is removed by mistake, the recording will be incomplete. When power is restored to the unit, “RESUME” will be displayed until normal operation is again possible.
7 Caution in case the digital input is interrupted during recording
In case the sampling frequency from the digital signal of DAT, DCC or satellite broadcasting is switched during recording, the digital input is interrupted but recording continues. A non- recorded blank is recorded in this period.
In the case that a satellite broadcasting signal is interrupted, the digital signal line is disconnected or the power supply of the source component is cut off and if the digital signal is recovered in less than about 5 seconds, recording continues while recording a
7 Recording of other-than-audio signals
This unit is designed exclusively for recording audio signals.
Even in the case that a digital signal contains graphic or character information, for example a CD graphics signal is input, the graphic or character information is not recorded.
7 Minimum recording time per track
The CD specifications state that the minimum length of a CD track must be 4 seconds. If a recording is stopped while the track is less than 4 seconds long, the unit will record digital silence until 4 seconds are reached, and then stop recording.
74
<PRE1282> En
