ERASING (CD-RW ONLY)
All Tracks Erasing (takes approximately 3 minutes for a finalized
1
2 Press the ERASE button twice (once to start TOC Erasing on a finalized
Ö “ALL”, “TRACK” and “ERASE?” are displayed repeatedly. Ö The function indicator blinks orange indicating that the
recorder is in All Tracks Erasing standby mode.
Ö Do not allow more than 8 seconds to elapse after step 2 has been performed before proceeding with step 3.
3 Press the 8 button to start the All Tracks Erasing.
Ö The function indicator lights orange and All Tracks Erasing starts.
Ö During All Tracks Erasing of a
Ö During All Tracks Erasing of a finalized
Ö All Tracks Erasing is completed in several seconds for a CD- RW which has not been finalized.
Ö You can stop the erase process by pressing the 7 button for 10 seconds. However, if the erase operation is stopped, the message “CHECK” “DISC” appears to indicate that the disc has not been normally erased.
4 The recorder stops when All Tracks Erasing is completed.
All Disc Erasing (requires recordable time plus 5 minutes)
1
2 Press and hold the ERASE button for about 4 seconds.
Ö The display panel displays “ALL”, “DISC”, “ERASE?” and “dE **:**” successively. Then the function indicator blinks orange indicating that the recorder is in the All Disc Erasing standby mode.
3 Press the 8 button to start the All Disc Erasing.
Ö The function indicator lights in orange and All Disc Erasing starts.
Ö During All Disc Erasing, “dE **:**” appears while the remaining time is displayed.
Ö You can stop the erase process by pressing the 7 button for 10 seconds. However, if the erase operation is stopped, the message “CHECK” “DISC” appears to indicate that the disc has not been normally erased.
4 The recorder stops when All Disc Erasing is completed.
92
