Americana Appliances CDR-850 manual Disc LOADING/UNLOADING, Loading/unloading a disc

	1	3	1	2, 4
1 Function indicator
1 Indicateur de fonction
1 Indicador de función
1			POWER
			OFF	ON
2			OPEN/
			CLOSE
3	Label surface
	Emplacement
	d’étiquette
	Superficie de la
	etiqueta
4			OPEN/
			CLOSE
44
<PRE1282>
En

DISC LOADING/UNLOADING

Loading/unloading a disc

1 Press the POWER switch to turn the power ON.

ÖThe function indicator blinks green.

ÖThe display panel is illuminated.

2 Press the OPEN/CLOSE 0 button to open the disc tray.

“OPEN” is displayed and the tray comes out.

ÖAfter recording or skip information recording, it takes a few seconds before the disc tray can open because the recording information is being written on the disc. “OPEN” blinks during this period.

3 Place a disc in the disc tray

ÖPlace the disc in the center of the tray with the label side up.

ÖWhen using an 8 cm (3 inch) disc make sure the disk is located in the groove in the middle of the CD tray.

ÖEnsure only one disc is loaded at a time

ÖThe disc must be loaded label side up. ( Please note this differs from the CDR-800 where the disc is loaded with the label side down.)

4 Press the OPEN/CLOSE 0 button to close the disc tray.

“CLOSE” is displayed and the tray is closed.

The disc tray can also be closed by

Öpressing the 3 button.

Öpushing the disc tray lightly.

ÖWhen a disc is loaded, the disc type is identified and the information on the disc is read. (During this time, “CD?”, “CD-R?” and “CD-RW?” are displayed alternately.)

ADisplay for a non-recorded CD-R disc:

BDisplay for a non-recorded CD-RW disc:

CDisplay for a partially recorded CD-R disc:

DDisplay for a partially recorded CD-RW disc:

EDisplay for a prerecorded CD or finalized CD-R disc: The total playing time is displayed.

FDisplay for a prerecorded and finalized CD-RW disc: The total playing time is displayed.

GAn attempt is made to start playback without loading a disc: