Americana Appliances CDR-850 manual

3, 4	1		6
SKIP ID SET			2
	REPEAT		2
			3
	1	2	3
			2
	4	5	6
	7	8	9
	10	>10	TIME
1
SKIP PLAY
			Turn this off.
			Extinction.
			Apague esto.
2
1	2	3
4	5	6	or
			ou
7	8	9	o
10	>10
3		SKIP ID
	SET	CLEAR
4		SKIP ID
	SET		CLEAR
6		OPEN/
		CLOSE
84
<PRE1282>
En

SKIPPING UNDESIRED TRACKS

Clearing skip ID from a track

1 Press the SKIP PLAY button to turn the SKIP ON indicator off.

ÖWith a CD-R or CD-RW disc which does not contain skip IDs, the SKIP ON indicator will not light even when the SKIP PLAY button is pressed.

2 Play the track with the skip ID to be cleared. Select it with the numeric buttons of the remote control unit or the 41 or Á¢ buttons (4 or ¢ on the remote control unit).

3 During playback of the track which is not to be skipped, press the SKIP ID CLEAR button.

“SKIP” and “CLEAR?” are displayed alternately.

ÖWhen the 41 or Á¢ buttons (4 or ¢ on the remote control unit) are pressed while “SKIP” and “CLEAR?” are displayed, tracks to which the skip IDs are set will be played in order of track numbers.

ÖThe selected tracks play back repeatedly.

ÖIf you press the SKIP ID CLEAR button during playback of a track without a skip ID, the unit searches for the next track with a skip ID (or it returns to the beginning if there is no next track) and starts playback.

ÖTo cancel the clearing mode, press the 3 button or SKIP ID SET button.

4 To clear a track of the skip ID, press the SKIP ID CLEAR button again while the track is playing.

5 Skip IDs can be cleared from other tracks by repeating steps 2 to 4 for each of them.

6 After having cleared the required skip IDs, press the OPEN/CLOSE 0 button.

ÖWhen the button is pressed to remove the disc, the skip ID clear data is recorded on the disc. At this time, and blinks “OPEN” is displayed for a few seconds, and the tray opens after the skip ID clear data has been recorded.

CAUTION:

Skip IDs cannot be set or cleared with CDs, finalized CD-R discs, or finalized CD-RW discs.