Americana Appliances CDR-850 manual 7Digital signal connections

A		DIGITAL
			OUTPUT
		OPTICAL COAXIAL
								CDR-850
	R	L	R	L
PUSH	PUSH	PUSH
	AES
	/EBU	BALANCED IN		BALANCED OUT			PARALLEL
	DIGITAL IN				LINE OUT		REMOTE	AC IN
	DIGITAL IN	DIGITAL OUT	LINE IN					SIGNAL
			R	L	R	L		GND
	OPTICAL COAXIAL	OPTICAL COAXIAL
	S/PDIF	S/PDIF
	DIGITAL IN		DIGITAL OUT
	OPTICAL COAXIAL		OPTICAL COAXIAL
		S/PDIF		S/PDIF				D
	C			DIGITAL
							OUTPUT
							INPUT
	B		OPTICAL COAXIAL					C

CONNECTION WITH OTHER EQUIPMENT

7Digital signal connections.

(Before connecting this unit with other units please remove the power connection to this unit.)

This unit features both optical and coaxial digital input and output sockets, allowing flexibility for various connection situations. The active input is selected from the front panel switch, the outputs are both active, therefore either or both can be used.

AConnect the digital input socket of the unit to the digital output of the source device, such as a CD player. Use either optical or coaxial connection. When making optical connections, align the connector carefully with the socket and insert fully into the socket.

BConnect either the optical or coaxial digital output socket of the unit to the digital input of an external device such as, a mixer, DAT or MD recorder. Never use both the optical and coaxial connectors together to the same device, but both outputs may be used to two different devices.

CFor coaxial digital connections use Phono/RCA type connectors with 75 Ω cable for correct impedance. Avoid the use of standard phono interconnection cables for digital signals, as they are not usually of the correct impedance and may cause signal degradation.

DAfter completing connections with other equipment please ensure the power connection to the unit is reconnected.

28

<PRE1282> En