22
MIDI COMMON CHANNEL - Page 2
Assign MIDI Common
Channel in this field
You can assign the MIDI Common Channel to a desired MIDI
Channel. Any and all pads, knobs or sliders assigned to the
MIDI Common Channel (C) will transmit MIDI information via
the channel number that you select in this field.
1. While in GLOBAL MODE, use [ > ] button to scroll to
MIDI Common Channel.
2. Turn [VALUE] dial to select desire MIDI Channel.
3. Press [ENTER] set MIDI Channel.
Note: If you change which channel the MIDI Common Channel is
using, you also need to set any device that is controlled by the
Common Channel to that channel number as well.
LCD CONTRAST - Page 3
Adjust contrast
in this field
The contrast of the LCD screen can be adjusted for optimal
viewing.
1. While in GLOBAL MODE, use [ > ] button to scroll to
LCD CONT.
2. Turn [VALUE] dial to select a contrast level. Possible
values are 0-100%.
3. Press [ENTER] to select desired contrast level.
PAD SENSITIVITY - Page 4
Adjust Pad Sensitivity
in this field
PAD SENSITIVITY allows you to adjust how sensitive the pads
will be to the touch. Adjust this setting if you find it hard to
achieve maximum velocity when you hit the pads hard, or if you
are getting high velocities when you hit softly.
If the Pad Sensitivity number is set to low number, it’s harder to
get a high velocity value even if you hit a pad hard. If the Pad
sensitivity number is set to high number, it may become too easy
to get high velocities even when you hit a pad softly.
1. While in GLOBAL MODE, use [ > ] button to scroll to
PadSens.
2. Turn [VALUE] dial to change Pad Sensitivity number.
3. Press [ENTER] to select desired senisitivity.