EDITING TIME DIVISION
The Time Division feature works in conjunction with Note Repeat. When Note Repeat is enabled and a pad is held down, the MPD26 will output notes at a rate equivalent to the Time Division setting. To change to a new Time Division setting, press and hold [TIME DIVISION] and select a new rate by pressing one of Pads 8- 16 (1/4, 1/4T, 1/8, etc.). To select the amount of Swing, press and hold [TIME DIVISION] and press one of Pads
Please refer to the following illustrations to better understand how the Time Division feature works with Note Repeat:
With an 1/8 note Time Division setting, the sequence will look like this.
With an 1/8T note Time Division setting, the sequence will look like this.
With a 1/16 note Time Division setting, the sequence will look like this.
With a 1/16T note Time Division setting, the sequence will look like this.
With a 1/32 note Time Division setting, the sequence will look like this.
With a 1/32T note Time Division setting, the sequence will look like this.
1.To edit Time Division settings, press the [EDIT] button to enter Edit Mode.
2.Now select Time Division for editing by pressing [TIME DIVISION].
3.You will see Page 1 displayed on the screen (shown on the left).
4.Press [ENTER] to edit the Time Division settings.
PRESS ENTER TO EDIT
DEFAULT TIME DIVISION
Each Preset can have a default Time Division setting which is set every time the Preset is loaded.
1.While in Default Time Division field, use [VALUE] dial to select the default Time Division (1/4, 1/4T, 1/8, etc.)
2.Press [>] to select the next field.
DEFAULT DIVISION FIELD
18
