TAP TEMPO AVERAGE – Page 8
When using [TAP TEMPO] button to set the tempo, the MPD26 averages a number of taps in order to determine the tempo. You can set the number of taps used to determine the TAP TEMPO AVERAGE in this field.
1.While in Global Mode, use [>] button to scroll to Tap AVG (page 8).
2.Turn [VALUE] dial to select number of taps.
3.Press [ENTER] to set tap average.
TAP AVERAGE FIELD
SAVE SETUP – Page 9
SAVE SETUP allows you to save any changes you may have made to the global parameters.
1.While in Global Mode, press [>] to scroll to Globals (page 9). You will see “Save Setup” displayed on the screen.
2.Press [ENTER] to save all the global settings on the MPD26.
PRESS ENTER TO SAVE
SYSEX TX – Page 10
CHOOSE PRESET
PRESS ENTER TO TRANFER
VERSION – Page 11
SYSEX TX allows you to transfer Preset data from the MPD26 via SysEx. This data includes Controller Numbers, MIDI Channels and various other parameters.
1.While in Global Mode, press [>] to scroll to SysEx Tx (page 10).
2.Turn the [VALUE] dial to select which Preset’s information you would like to transfer.
3.Press [ENTER] to save all the global settings on the MPD26.
SysEx transfers to the MPD26
You can also load preset data into the MPD26 from an external source by “playing” a SysEx file into the MPD26. This can be done with a variety of SysEx applications, many of which are widely and freely available over the Internet.
1.Make sure that the device is connected to the MPD26 either via the USB or the MIDI IN port.
2.Make sure that you are in Preset Mode.
3.“Play” the SysEx file on your external device or computer.
Please note that when transferring SysEx information into the MPD26, the data will override the data of the original Preset which was sent to your SysEx editor. For example, if you transfer Preset 5 to your SysEx editor and then send it back to the MPD26, the data will overwrite Preset 5.
VERSION allows you to see what version of the operating system and firmware is currently loaded onto the MPD26.
While in Global Mode, press [>] to scroll to Ver (page 11) for version information.
23
