KEY FEATURES

16 pressure and velocity-sensitive MPC pads with four banks each

MPC technologies include Note Repeat, Swing, 16 Level, Full Level, and Tap Tempo

12 assignable Q-Link knobs and faders

Dedicated transport controls transmit MMC, MIDI Clock or MIDI CC messages to DAW and sequencing applications

MIDI output over USB and traditional MIDI I/O for controlling software and hardware

Backlit, easy-to-read screen

USB bus powered, class compliant: plug and play with one USB cable

Comes with Editor Librarian software

CONNECTION DIAGRAM

POWER (optional,

not included)

A NOTE ABOUT USING THE MPD26

COMPUTER

WITH SOFTWARE:

 

 

1. Make sure that all external devices

 

are connected to the MPD26 and

 

that the MPD26 is connected to your

 

computer, using the included USB

 

cable, before opening any software

 

applications on your computer with

 

which you might want to use the

 

MPD26. If the unit is not plugged in

 

before, your software application

 

might not recognize the MPD26 as

 

an available device.

 

2. In your software application, you will

 

need to set the MPD26 as a default

 

MIDI input device. This is usually

 

done in the MIDI section of the

 

Preferences menu.

EXTERNAL SOUND

EXTERNAL MIDI

MODULE

DEVICE

1.Connect a USB cable from your computer to the MPD26. The unit will be powered through the USB connection. Alternatively, if you do not wish to use a computer in your setup or if you wish to power the MPD26 externally, please plug in an optional Akai MP6-1 (6V-1A DC) power adapter.

2.If you would like to use an external sound module, connect a 5-pin MIDI cable from the MIDI OUT of the MPD26 to the MIDI IN of the external device.

A NOTE ABOUT USING THE MPD26 WITH SOFTWARE:

The operation of the MIDI OUT port changes depending on whether or not a USB cable is connected to the MPD26.

USB cable connected:

MIDI data from your computer is passed to the MIDI OUT port. When a USB cable is connected, you should activate "MIDI echo" in your sequencer if you want the MPD26 to control another external device.

USB cable not connected:

Whatever you play on the MPD26 is sent to the MIDI OUT port.

Note: If you have another device connected to the MPD26's MIDI IN port, that device's MIDI information will be ignored.

3.If you would like to use another MIDI controller in your setup, connect a 5-pin MIDI cable from the MIDI OUT of the external MIDI device to the MIDI IN of the MPD26.

1

Page 3
Image 3
Akai MPD26 manual KEY Features, Connection Diagram