Viewing the Error Log
ERROR LOG appears on the display followed by the first entry in the error log if there are any errors. Up to ten error codes can be retrieved.
If there are no errors in the log, you will see NO MORE ERRORS displayed.
7.To view any additional error codes in the error log, use the arrow keys. Each error code specifies when it occurred, listing the odometer and hour meter values. Refer to Diagram 6.
SmartRate
|
| Cardiovascular | Above | Heart Rate |
|
|
|
| Weight Loss | 1 |
| Most recent | |
Below |
|
| ||||
|
|
|
|
|
|
|
error
Error code
12000 revs 17 HrS 
Revolutions reading at | The hour meter at the time |
|
| ||
the time the error | the error was detected. | |
occurred. |
|
|
Diagram 6: Error log
8.Copy the error code information to paper so you can provide it to Customer Support if needed. Be sure to copy it exactly as shown.
9.When you no longer need the information in the error log, press QUICKSTART for at least four seconds to delete the error log. Continue to maintain light pressure on the key until the message CLEARED appears. When the key is released, 1 appears in the Heart Rate display and dashes appear in the error code display, which indicates the error log has been deleted.
Important: You cannot retrieve the error log once you have deleted it. You may want to resolve any issues you are experiencing with the cycle before clearing the error log.
10.When you are ready, press SELECT (C842i) or ENTER (C846i) to move to the next display (serial number).
Product Owner’s Manual: Club Features | 16 |
