Recumbent Seat Adjustment

1.Sit on the seat with your feet in the pedals.

2.Pull the seat adjustment handle up while you bend your knees and slide the seat forward or backward along the seat rail. Refer to Diagram 8.

Upright Cycles: Adjusting the Seat Tilt

To adjust the seat tilt on upright cycles, take the following steps.

1.Use a 11/16-inch (17 mm) box-end wrench or crescent wrench to loosen the nut beneath the seat. Refer to Diagram 9.

Diagram 8: Adjusting the seat on the C842i Recumbent Cycle

3. Align the seat with one of the marks on the seat rail and release the handle.

Diagram 9: Loosen nut to adjust seat tilt

4.Try to slide the seat along the seat rail. Make sure the seat does not move before beginning your exercise session.

Product Owner’s Manual: Maintenance

21

Page 23
Image 23
Precor owner manual Upright Cycles Adjusting the Seat Tilt, Diagram 8 Adjusting the seat on the C842i Recumbent Cycle