Alamo 1595 manual Assembly, Dismounting and Mounting Mid-Mount Loader

(SL-23)

ASSEMBLY

ASSEMBLY

Dismounting and Mounting Mid-Mount Loader

To avoid injury during installation of loader, do not allow bystanders within 10 feet of loader or attachment.

Always have a heavy attachment, such as a bucket mounted on loader when it is removed from tractor.

Always use a drift hammer made of non-sparking material (a shot-filled mallet is recommended) to install or remove pins. A steel hammer or drift could generate flying metal fragments and result in injury. Always wear safety glasses when using a hammer to remove or install pins.

Always have a heavy attachment, such as a bucket mounted on loader when it is removed from tractor.

It is important not to put excessive weight on parking stands with lift cylinder retraction. Damage may result.

Never allow anyone to get under the loader or attachment or to reach through the loader lift arms when raised. Serious injury could result from crushing or pinching by the loader or attachment. (SL-06)

Make sure the loader is properly attached to the tractor and the retaining pins securely lock the loader into position. Improper mounting of the loader onto the tractor can result in the loader falling causing serious injury.

1595 01/11 Assembly Section 3-2

© 2011 Alamo Group Inc.