MAINTENANCE

General Information on Flail Mower Vibration

FLAIL MOWERS

INFORMATION BULLETIN NO. 5

EXCESSIVE VIBRATION

Vibration is a MONSTER and if allowed to continue unchecked, can cause the complete break-up of a machine in a very short time.

A properly operated Flail Mower will produce very little vibration. If vibration does occur, the mower should be stopped and the trouble corrected, as warranty does not cover failures resulting from continued operation after something happens to cause the mower to vibrate excessively.

Vibration is caused by a rotating part which is out of balance. This could be the cutter shaft or, on those mod- els having a universal slip joint assembly drive shaft, from the drive shaft.

If the two extreme ends of the drive shaft, (the yoke splines which fit on the tractor power take off shaft and on the mower gear box driven shaft), are not parallel, vibration will be evident.

This is because of the mechanics of a universal drive wherein the rotational speed thru a universal joint is not uniform. If the ends of a universal drive shaft are parallel, the uneven rotation effect is cancelled out and the machine being driven will be driven at a uniform rate of speed. However, if the ends are not parallel, the uneven rotation effect may be multiplied, resulting in a speeding up and slowing down of the entire mower sys- tem (gear box, extension shaft, pulleys, belt, and cutter shaft) each revolution. This effect can be readily noticed if the mower, while running, is raised to an extreme height on the tractor lift.

For smoothest operation, the tilt of the mower should be adjusted (on a 3-point hitch, by adjusting the length of the top link between the tractor and the mower) so that the ends of the drive shaft are parallel when the mower is down in operating position. Raising the mower, while running, to extreme heights on the lift should be avoided.

To check where the vibration is originating, first be sure the ends of the universal drive shaft are parallel. Then, if vibration is still present, remove the drive belt and run the mower. If vibration is still present, it most likely is coming from and caused by a bent drive shaft. If so, the shaft should be replaced or straightened. If the vibra- tion is gone - the drive portion of the mower is running smoothly - then the vibration is probably coming from the cutter shaft (it could be a pulley out of balance or a faulty belt with a varying cross section, but this is not likely).

The cutter shaft will run out of balance if:

1.Wire, rope, string, rags, etc., around the cutter shaft, are holding the knives in a folded back position. Remove such foreign objects and be sure all knives are free to swing to the extended position.

2.Knives are missing or broken. Replace missing or broken knives.

3.Knife hanger lugs are broken off shaft. This condition usually results from continued operation in contact with large hard objects where the knife hanger lugs themselves are hitting the hard objects. Lugs should be replaced using arc welding equipment so as not to direct too much heat in one area of the shaft.

4.Cutter shaft ball bearings are worn enough to have radial "play" in them. Replace ball bearing and other worn parts to eliminate "play".

5.Shaft is bent. The shafts are straight within a couple of thousandths of an inch when they are made. It is possible that they will become bent in use, such as if the shaft is hooked on a stump while the tractor is moving forward at a good speed.

6.Shafts are operated at improper speed. Rotating shafts have what is known as a natural period of vibra- tion. The same is true of the cutter shafts on the Flail Mowers.

AXTREME 2 02/10

Maintenance Section 4-13

©2010 Alamo Group

MAINTENANCE

Page 152 Page 154
Page 153
Image 153
Alamo Lawn Mower manual General Information on Flail Mower Vibration, Flail Mowers Information Bulletin no
Page 152 Page 154

Lawn Mower specifications

The Alamo Lawn Mower stands out in the market for its superior performance, efficiency, and innovative features. Designed to cater to both residential and commercial landscaping needs, it combines power, durability, and user-friendly characteristics, making it a favorite among homeowners and professionals alike.

One of the main features of the Alamo Lawn Mower is its powerful engine, often equipped with a robust, efficient motor that ensures a clean and precise cut. This engine's power translates to reliable performance even in dense grass and challenging terrain. The mower's cutting deck typically ranges from 21 to 30 inches, allowing for easy navigation through small and tight spaces while still effectively managing larger lawns.

The design of the Alamo Lawn Mower emphasizes ergonomics and comfort. With adjustable handles and cushioned grips, operators can easily maneuver the unit for extended periods without discomfort. Some models even incorporate self-propulsion technology, reducing operator strain and allowing for effortless movement across various landscapes.

In terms of technology, Alamo lawn mowers frequently feature advanced blade systems that promote superior mulching and bagging capabilities. The innovative blade designs enhance cutting efficiency, producing fine clippings that decompose quickly, returning nutrients to the soil. Furthermore, these mowers often come with adjustable cutting height settings, giving users the flexibility to choose their desired grass length based on specific lawn requirements.

Another notable characteristic is the mower's durability. Constructed with heavy-duty materials, including rust-resistant steel decks, Alamo lawn mowers are built to withstand the test of time. This durability ensures the mower remains operational through numerous seasons, making it a worthwhile investment for users.

Moreover, some models are powered by eco-friendly technologies, such as battery-operated motors, which reduce noise and emissions, appealing to environmentally conscious consumers. The convenience of electric models also translates to reduced maintenance, as they require less frequent servicing compared to traditional gas-powered alternatives.

Overall, the Alamo Lawn Mower combines advanced technology, robust engineering, and user-centric features to deliver exceptional cutting performance. Whether trimming the grass at home or maintaining a commercial landscape, Alamo lawn mowers provide the reliability and efficiency that users demand. With a focus on innovation and sustainability, the Alamo brand continues to challenge norms in lawn care technology, promising a greener future for landscaping enthusiasts.
Top Page Image Contents