(SG-35)
(SG-9)
(SG-25)

OPERATION

11.TRACTOR, BOOM, AND ATTACHED HEAD STORAGE

Properly preparing and storing the unit at the end of the season is critical to maintiang its appearance and to help ensure years of dependable service. The following are suggested storage procedures:

Thoroughly clean all debris from boom and head to prevent damage from rotting grass and standing water.

Lubricate all grease points and fill oil levels according to the maintenance lubrication schedule.

Tighten all bolts to the proper torque. Ensure all pins and other hardware are in place.

Check the boom arm and head for worn and damaged parts. Perform repairs and make replacements so that the mower will be ready for use at the start of the next season.

Store the unit in a clean and dry location.

Use spray touch-up enamel where necessary on bare metal surfaces to prevent rust and to maintain the appearance of the mower.

OPS-B- 0012_C

Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves or others.

BEFORE leaving the tractor seat, always set the parking brake and/or set the tractor transmission in parking gear, disengage the PTO, stop the engine, remove the key, and wait for all moving parts to stop. Place the tractor shift lever into a low range or parking gear to prevent the tractor from rolling. Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only.

Perform service, repairs and lubrication according to the maintenance section. Ensure the unit is properly lubricated as specified in the lubrication schedule and all bolts and nuts are properly torqued. Failure to properly service, repair and maintain this Implement in good operating condition could cause component failure and possible serious injury or even death.

12.TRANSPORTING THE TRACTOR AND IMPLEMENT

Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind when you finish working in an area. Therefore, the operator must employ good judgement and safe operation practices when transporting the tractor and implement between locations. By using good judgement and following safe transport procedures, the possibility of accidents while moving between locations can be substantially minimized. OPS-U- 0017

AXTREME 2 02/10

Operation Section 3-47

© 2010 Alamo Group

OPERATION

Page 133
Image 133
Alamo Lawn Mower manual TRACTOR, BOOM, and Attached Head Storage

Lawn Mower specifications

The Alamo Lawn Mower stands out in the market for its superior performance, efficiency, and innovative features. Designed to cater to both residential and commercial landscaping needs, it combines power, durability, and user-friendly characteristics, making it a favorite among homeowners and professionals alike.

One of the main features of the Alamo Lawn Mower is its powerful engine, often equipped with a robust, efficient motor that ensures a clean and precise cut. This engine's power translates to reliable performance even in dense grass and challenging terrain. The mower's cutting deck typically ranges from 21 to 30 inches, allowing for easy navigation through small and tight spaces while still effectively managing larger lawns.

The design of the Alamo Lawn Mower emphasizes ergonomics and comfort. With adjustable handles and cushioned grips, operators can easily maneuver the unit for extended periods without discomfort. Some models even incorporate self-propulsion technology, reducing operator strain and allowing for effortless movement across various landscapes.

In terms of technology, Alamo lawn mowers frequently feature advanced blade systems that promote superior mulching and bagging capabilities. The innovative blade designs enhance cutting efficiency, producing fine clippings that decompose quickly, returning nutrients to the soil. Furthermore, these mowers often come with adjustable cutting height settings, giving users the flexibility to choose their desired grass length based on specific lawn requirements.

Another notable characteristic is the mower's durability. Constructed with heavy-duty materials, including rust-resistant steel decks, Alamo lawn mowers are built to withstand the test of time. This durability ensures the mower remains operational through numerous seasons, making it a worthwhile investment for users.

Moreover, some models are powered by eco-friendly technologies, such as battery-operated motors, which reduce noise and emissions, appealing to environmentally conscious consumers. The convenience of electric models also translates to reduced maintenance, as they require less frequent servicing compared to traditional gas-powered alternatives.

Overall, the Alamo Lawn Mower combines advanced technology, robust engineering, and user-centric features to deliver exceptional cutting performance. Whether trimming the grass at home or maintaining a commercial landscape, Alamo lawn mowers provide the reliability and efficiency that users demand. With a focus on innovation and sustainability, the Alamo brand continues to challenge norms in lawn care technology, promising a greener future for landscaping enthusiasts.