MAINTENANCE
AXTREME 2 02/10 Maintenance Section 4-2
©2010 Alamo Group
MAINTENANCE
Lubrication Information
Before operating your Implement, take the time to inspect and repair any damage to the machine or tractor.
Only a minimum of time and effort is required to r egular l y maintain this machine to provide long life an d trouble
free operation.
BOOM ARM:
Your Boom uses greased bushings that need lubrication, and with proper lubrication should last the lifetime of
the machine.
MOWER HEAD:
The Spindle Housing on the Mower head should be serviced daily (every eight hours of operation) to achieve
the best operation and the longest life. Fill with NLGI EP#2 Grease.
DRIVELINE:
The driveline powering the hydraulic system may have a universal joint at each end. Check you tractor and
locate the grease points on the driveline that is connected from the front engine pulley to the front mounted-
pump. Grease weekly
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydr aul ic p ressure. Wear oil impene tr able glo ves ,
safety glasses and use Cardboard to check for evidence of oil le aks. If
you suspect a leak, REMOVE the HOSE and have i t tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure. (SG-15)