Alamo Lawn Mower Saw Blade Tree Limb Cutter

OPERATION

AXTREME 2 02/10 Operation Section 3-44

OPERATION

Saw Blade Tree Limb Cutter

• The BuzzBar Tree Limb Cutter is rated for

material up to 6” in diameter.

• Suggested cutting S peed for the Buzzbar is 1st

gear. Slow down for thick, dense, or hard

material.

• Always cut with the boom positioned

perpinducular to the limbs being cut (see

diagram). Cutting with the boom swing

backward or forward will cause the blades to

warp from “raking” through the cut material.

• For maximum blade life, do not allow the

blades to contact hard items such as the

ground or metal objects.

• Check belt tension daily.If belts start to slip

adjust tension soon. The more belt slippage,

the more they will wear and looser they

become.

• Grease bearings of saw blade spindles daily.

• Two pumps from hand grease gun.

• When operating the unit be sure there are no

bystanders or animals within 100 yards of the

unit.

OPS-B- 0043

Do not put hands or fe et near the cutter ba r. Blade contact can result

in serious injury. Stay away until all motion has stopped and the

mower is securely blocked up . (SBM-24)

The rotating parts of this machine have been designed and tested for rugged use.

However, the blades could fail upon impact with heavy, solid objects such as metal guard

rails and concrete structures. Such impact could cause the broken objects to be thrown

outward at very high velocities. To reduce the possibility of property damage, serious

injury, or even death, never allow the cutting blades to contact such obstacles. (SGM-4)