Alamo SM72 manual Rear Chain Guard Assembly, Side Deflector Assembly

ASSEMBLY

REAR CHAIN GUARD ASSEMBLY

1.Place Deflector Strap (6) against mower deck left side and Chain Guard Bracket (8) against mower deck right side. Place Rear Deflector Panel (5) against bracket and deflector and align hole through panel, deflector/bracket, and mower deck and secure together using 1/2” x 1- 1/2” Bolts (4), Flatwashers (2), and Locknuts

(1).

2.Tighten all bolts and nuts to the recommended torque. (Refer to Image Asm-R-0272)

Rear Chain Guard Assembly

SIDE DEFLECTOR ASSEMBLY

Place Side Deflector Panel (3) on top lip of left rear discharge chute. Place Side Deflector Strap (4) on top of panel and align holes of strap, panel, and mower deck. Secure together using 1/2” x 1-1/4” Bolts (1) and Locknuts (2).

1.Secure side deflector panel (3) end to chute using bolts (1), Flatwasher (5), and Locknut (2).

2.Tighten all bolts and nuts to the recommended torque. (Refer to Image Asm-R-0273)

Side Deflector Assembly

SM72 02/10 Assembly Section 3-5

© 2010 Alamo Group Inc.

ASSEMBLY