OPERATION
OPERATION
11. MOWER STORAGE
Properly preparing and storing the mower at the end of the season is critical to maintaining its appearance and to help ensure years of dependable service. The following are suggested storage procedures:
1.Thoroughly clean all debris off the mower to prevent damage from rotting grass and standing water.
2.Lubricate all mower grease points and fill spindle oil level as detailed in the maintenance section.
3.Tighten all bolts and pins to the recommended torque.
4.Check the mower for worn and damaged parts. Perform repairs and make replacements immediately so that the mower will be ready for use at the start of the next season.
5.Store the mower in a clean, dry place with the mower housing resting securely on blocks or at ground level.
6.Keep the hydraulic hose ends from sitting in water, dirt and other contaminants. Connect the mower’s hydraulic lines together to prevent
dirt and other contamination from entering the hydraulic system.
7.Use spray
It is critical that the driveline clutch slip when an obstacle or heavy load is encountered to avoid mower and/or tractor damage. If the mower sits outside for an extended period of time or is exposed to rain and/or humid air, the clutch lining plates must be inspected to ensure they are not frozen together from rust or corrosion. If the mower has been exposed to such conditions, at the start of each mowing season, and any time it is suspected that the slip clutch plates may be frozen together, readjust the slip clutch as detailed in Clutch Maintenance section of this manual.
Never allow children to play on or around Power Unit or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves or others.
SM72 02/10 | Operation Section |
© 2010 Alamo Group Inc.
