Mainboard
SATA II Connector: SATA1/SATA2/SATA3/SATA4
The four SATA II connectors support 3 Gbps transmit rate and RAID 0/1/ 0+1/ JBOD/ 5 mode. One SATA II connector only can attach one SATA II HDD of each time using SATA cables.
| Pin | Assignment | Pin | Assignment |
1 | 1 | Ground | 2 | TX+ |
3 | TX- | 4 | Ground | |
SATA1~4 |
|
|
|
|
5 | RX- | 6 | RX+ | |
| 7 | Ground |
|
|
This mainboard supports RAID 0/1/0+1/JBOD/5 modes, refer
Appendix II for more information.
Attention
The FDC/ IDE cable is designed and should be attached with a specific direction. One edge of the cable will usually in color such as red, to indicate that should line up with the header
Front Panel Headers: SW/LED, SPEAKER
SW/LED
Pin | Assignment |
| Function | Pin | Assignment | Function |
1 | HDD LED (+) |
| Hard Drive LED | 2 | Power LED (+) | Power LED |
3 | HDD LED |
| (HD_LED) | 4 | Power LED | (ACPI_LED) |
5 | Reset Control |
| Reset Switch | 6 | Power Switch (+) | |
7 | Reset Control (+) |
| (RST_SW) | 8 | Power Switch | (PWR_SW) |
9 | N/A |
| 10 | N/A | ||
12