Mainboard KI51PV-754

When this option is enabled, each of the ranges is from 1 minute to 1 hour except for HDD Power Down, which ranges from 1 minute to 15 minute and includes a “disable” option.

Note: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value will be fixed. User Define, Min Saving, Max Saving

Video Off Method

This option determines the manner in which the monitor goes blank.

Options:

 

Blank Screen

This option only writes blanks to the video buffer.

V/H SYNC+Blank

This selection will cause the system to turn off the vertical and

horizontal synchronization ports and write blanks to the video buffer.

DPMS Support (Default)

Initial display power management signaling.

HDD Power Down

When enabled, the hard disk drive will power down after a certain configurable period of system inactivity. All other devices remain active.

Options: Disabled (Default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.

HDD Down In Suspend

This option allows you to enable/ disable the hard driver power down in the suspend state. Options: Disabled (Default), Enabled.

Soft-Off by PWRBTN

In situations where the system enters a “hung” state, you can configure the BIOS so that you are required to press the power button for more than 4 seconds before the system enters the Soft-Off state. Options: Delay 4 Sec, Instant-Off (Default).

PCI PME Wake Up

This option will also cause the system to wake up with any onboard LAN activity. Options: Disabled (Default), Enabled.

Ring Wake Up

This option allows you to awaken the system upon receiving an incoming call from a modem device. Options: Disabled (Default), Enabled.

RTC Wake Up

When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. Options: Enabled, Disabled (Default).

Day of Month Alarm

33