Mainboard KI51PV-754

SATA1/2 Primary/ Secondary RAID

This allows you to enable or disable the RAID function for the SATA1/2 Primary/Secondary device. Options: Enabled, Disabled (Default)

Serial-ATA 1/2

This item allows you to enable or disable the SATA1/2 device.

Options: Enabled (Default), Disabled.

Onboard Device

If you highlight the “Onboard Device” label and then press the enter key, it will take you to a submenu with the following options:

OnChip USB

This option should be enabled if your system has a USB port installed on the system board. You will need to disable this feature if you add a higher performance controller.

Options: V1.1+V2.0 (Default), Disabled, V1.1.

USB Memory Type

This option allows you to set your USB Memory Type.

Options: SHADOW, Base Memory (640k) (Default).

USB Keyboard Support

This option allows you to enable the USB attached keyboards and storages. Options: Disabled (Default), Enabled.

AC97 Audio

This option allows you to control the onboard AC’97 audio.

Options: Enabled (Default), Disabled.

MAC Lan

This option allows you to control the onboard LAN device. Options: Enabled (Default), Disabled.

MAC Media Interface

This option allows you to control MAC Media Interface. Options: Pin Strap (Default), MII, RGMII

Onboard I/O Chip Setup

If you highlight the “Onboard I/O Chip Setup” label and then press the enter key, it will take you to a submenu with the following options:

Power On Function

This option allows you to select a method of awakening the system from sleep mode.

Options: Hot KEY, Mouse Left, Mouse Right, Any KEY, BUTTON ONLY (Default), Keyboard 98.

30