Alcatel 1040X, 1042X manual Power on your phone, Power off your phone, Charging the battery

Models: 1042X 1040X

1 31
Download 31 pages 44.86 Kb
Page 10
Image 10

Charging the battery

Connect the battery charger to your phone and mains socket respectively.

Charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

The mains socket must be near to the phone and easily accessible (avoid electric extension cables).

When using your telephone for the first time, charge the battery fully

(approximately 3 hours). You are advised to fully charge the battery ( ).

To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; reduce the backlight time, etc.

The charge is complete when the animation stops.

17

1040XD_1042XD_UM_Eng_GB_02_141009.indd 17-18

1.2Power on your phone

Hold down the key until the telephone powers on, type in your PIN code if necessary and then confirm. The main screen is displayed.

If you do not know your PIN code or if you have forgotten it, contact your network operator. Do not leave your PIN code with your telephone. Store this information in a safe place when not in use.

If cell broadcast messages are displayed, you can browse through them or

press to return to the main screen.

While the phone is searching for a network, "Searching/Emergency" will be displayed.

1.3Power off your phone

Hold down the key from the main screen.

18

2014/10/9 16:55:38

Page 10
Image 10
Alcatel 1040X, 1042X manual Power on your phone, Power off your phone, Charging the battery