Inserting or removing the SIM card (1)
You must insert your SIM card to make phone calls. Please power off your phone and remove battery before inserting or removing the SIM card.
Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.
Installing or removing the MicroSD card
Insert the MicroSD card with golden contact facing downwards into the slot until it is locked. Gently push the memory card until it is unlocked.
To remove the microSD card while the phone is on, you must unmount the storage card from the phone first (ref to “To safely remove the microSD card from your phone”), to prevent corrupting or damaging the storage card.
(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible.The old 5 volt cards can no longer be used.
Installing or removing the battery
Please power off your phone before removing the battery.
•Insert and click the battery into place, then close the phone cover.
•Unclip the cover, then remove the battery.
Charging the battery
Standard charger 
UK charger
Connect the battery charger to your phone and mains socket respectively.
•The phone will be switched on when charging the battery.
•Be careful not to force the plug into the socket.
•Make sure the battery is correctly inserted before connecting the charger.
•The mains socket must be near to the phone and easily accessible (avoid electric extension cables).
15 | 16 |
