Installing and removing the microSD card
Insert the external microSD card into the slot with the gold contact facing down.To remove the external microSD card, gently press and slide it out.
Before removing the microSD card, you should ensure the phone is off, to protect it from corruption or damage. In addition, regularly removing or inserting the SD card may cause the phone to restart.
Charging the battery
Connect the battery charger to your phone.
•Make sure the battery is correctly inserted before connecting the charger.
•When using your telephone for the first time, charge the battery fully (approximately 5 hours).
You are advised to fully charge the battery ( ). Charging status is indicated by the percentage on screen while the phone is powered off. The percentage increases as the phone is charged.
The charging status bar will not float if your battery is extendly consumed. To reduce power consumption and energy waste, when battery is fully charged,disconnect your charger from the plug; switch off
1.2.2Power on your phone
Hold down the Power key until the phone powers on, unlock your phone (Slide, PIN, password, Face unlock or pattern) if necessary and confirm. The Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your network operator. Do not leave your PIN code with your phone. Store this information in a safe place when not in use.
Set up your phone for the first time
The first time you power on the phone, you should set the following options:
•Touch Get started..., then select the phone's language.
•The device will search for service by itself. The process of activation will take a few minuties
•Select your input keyboard, then touch Next.
•Select SIM you want to use, then touch Next.
•Set your date and timezone, you can also choose Automatic time zone, then touch Next.
18 | 19 |
