Alen MDF1-30AE Lack of ventilation can cause overheating and fire, Never do this Always do this

SAFETY PRECAUTIONS

To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications.

!WARNING This symbol indicates the possibility of death or serious injury.

! CAUTION This symbol indicates the possibility of injury or damage to property.

Meanings of symbols used in this manual are as shown below.

Never do this.

!

Always do this.

!Do not exceed the rating of the power outlet or connection device.

Otherwise, it may cause electric shock or fire due to excess heat generation.

!WARNING

Do not operate or stop the	Do not damage or use an
unit by switching on or off	unspecified power cord.
the power.

It may cause electric shock or fire It may cause electric shock or fire. due to heat generation.

!Do not modify power cord length or share the outlet with other appliances

It may cause electric shock or fire due to heat generation.

!Disconnect the power if strange sounds, smell, or smoke comes from it.

It may cause fire and electric shock.

Do not insert or pull out	Do not place the unit near
plug with wet hands.	a heat source.
It may cause electric shock.	Plastic parts may melt and cause
	a fire.
You should never try to take	! Before cleaning, turn off
apart or repair the unit by	the power and unplug the
yourself.	unit.
It may cause failure of machine	It may cause electrical shock or
or electric shock.	injury.

Do not use the machine near flammable gas or combustibles, such as gasoline, benzene, thinner, etc.

Do not drink or use the water drained from air conditioner.

Do not open the unit during operation.

It may cause an explosion or fire.

It contains contaminants and It may cause electric shock.

could make you sick.

!CAUTION

When using in closets or other small spaces, be sure to keep doors open.

Lack of ventilation can cause overheating and fire.

Do not put in places where water may splash onto the unit.

Water may enter the unit and degrade the insulation. It may cause an electric shock or fire.

!Place the unit on a level, sturdy section of the floor.

If the unit falls over, it may cause water to spill and damage belongings, or cause electrical shock or fire.

2