Precautions

Before installing your 1:5 HDD Cruiser, please read the following.

Installation

Avoid placing the 1:5 HDD Cruiser in a location subject to:

•High humidity

•High temperature

•Excessive dust

•Mechanical vibration

•Direct sunlight

•Electromagnetic radiation

Power

This product has a manually switchable power supply. Make sure that the power supply is set to the proper voltage for your region.

Choose a Good Location

1.Allow adequate clearance for moving parts.

2.Do not place near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

3.Disconnect the AC adapter from the outlet if the product is not used for an extended period of time.

4.Proper care will help assure maximum product life. Improper operating environment and misuse may void the warranty.

Operation

Do not move the 1:5 HDD Cruiser during operation. This may cause a malfunction or other undesirable results.

Avoid exposing the unit to sudden changes in temperature as condensation may form inside the 1:5 HDD Cruiser. Should the surrounding temperature suddenly rise while the 1:5 HDD Cruiser is on, wait at least one hour before turning off the power. Operating the duplicator immediately after a sudden increase in temperature may result in a malfunction.

Transportation

Keep the original packing materials for future moving or shipping of the 1:5 HDD Cruiser.

www.aleratec.com5