Aleratec 350104 Adv Setup: Quick Erase HDD

Using the 1:5 HDD Cruiser

Main Menu

Adv Setup

Adv Setup: Quick Erase HDD

This function is used to erase the data of a hard drive quickly.

Warning: Backup any important data before using this function.

1.Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.

11. Adv Setup



ENT ESC



2.Use the arrow buttons (or) to select “Quick Erase HDD”. The following screen will be displayed.

11-04. Adv Setup Quick Erase HDD



ENT ESC



3.Press ENT, and then use the arrow keys () to select a hard drive to erase. An example is shown below.

1 Target CH:1 HDS721616PLA380



ENT ESC



4.Press ENT, and you will be prompted whether you wish to proceed. Use the arrow keys () to select “Yes” or “No”. The following screen will be displayed.

All data will be lost, erase? No



ENT ESC



5.Press ENT and the Quick Erase will begin. Once complete the following information will be displayed.

Erasing Target		The Selected HDD
Please Wait...		Erase Finished

40www.aleratec.com