Using the 1:5 HDD Cruiser

Main Menu

ReScan Bus

The “ReScan Bus” function causes the 1:5 HDD Cruiser to redetect connected hard drives. This can be used when you change drives without restarting the system.

1.Use the arrow buttons (or) to select “ReScan BUS”. The following screen will be displayed.

6. ReScan BUS

ENT ESC

2.Press ENT to select. The system will prompt you to confirm that you wish to proceed.

ReScan BUS Now? Yes

ENT ESC

3.Press ENT to begin the rescan, during which the following screen will be displayed.

Detect Drives

Please wait...

ENT ESC

Note: The order of scanning is CH:0 ~ CH:4.

4.When the rescan is complete, the following screen will be displayed.

Bus re-scan OK! Found 6 Devices

ENT ESC

18www.aleratec.com