Using the 1:5 HDD Cruiser

Main Menu

Adv Setup

Adv Setup: H/W Diagnostic

This function is used to test various components of the 1:5 HDD Cruiser.

1.Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.

11. Adv Setup

ENT ESC

2.Use the arrow buttons (or) to select “H/W Diagnostic”. The following screen will be displayed.

11-06. Adv Setup H/W Diagnostic

ENT ESC

3.Press ENT to begin the diagnostic tests. The following tests will be performed: Button Test, Self-Test of SDRAM, Hardware Connection Test, and Flash Test. Follow the on screen prompts to complete each test. All test results will be shown in the display panel.

LCD Test Start

Test IDE 0/1

OK

Button Test →

Flash Test: OK

SDRAM Test: 8192Kbytes OK

Test finished

4.When all tests are complete the following information will be displayed.

Test Finished

ENT ESC

42www.aleratec.com