Troubleshooting

4.“Source Selected..” Error

▪▪The printer is still in “paper” printing mode instead of “disc” printing mode. Push the Printer Mode Switch on the disc autoloader to the “disc” position.

Printer Mode Switch Disc Position

Paper Position

5.“Unload Disc Error”

▪▪A completed disc has not been dispensed properly into the disc collection bin. Clear the disc and click the “Continue” button.

6.“No Disc Loaded..” Error

▪▪There are not enough blank discs in the disc autoloader to complete the job. Load blank discs and click the “Continue” button.

This error can also happen when a completed disc has not been dispensed properly. If this is the case, clear the disc(s) and click the “Continue” button.

22www.aleratec.com