Operating Instructions
OPERATING
INSTRUCTIONS
Before turning the mixer on, "zero out' the controls
To avoid surprises while you're setting up a new system, set all controls to their "zeroed out" positions as follows before proceeding:
1.Make all connections to the Multimix 12R, as described in the previous chapter.
2.Bring all channel faders and the [MASTER] fader down to minimum.
3.Set all [TRIM] controls to minimum (full counterclockwise).
4.Set all [AUX 1], [AUX 2], STEREO AUX RETURN, [PHONES/MONITOR] controls to minimum (full counterclockwise).
5.Set all [HIGH] and [LOW] EQ, [PAN], and [BAL] controls to "12 o'clock".
Multimix 12R Reference Manual | 25 |
