Specifications
Hum or noise from | Ground loop, | Try plugging the unit |
output. | unshielded cables. | into another power |
|
| jack or different audio |
|
| cables. |
No meter, although | Monitor switch is set | Set switch to "MSTR" |
audio is heard through | to “TAPE” |
|
main outputs. |
|
|
Crackling sounds. | Dirty or corroding | Unplug and replug |
| connections on back | connectors several |
| of mixer. | times, clean plugs. |
| A microphone cable | Unplug the |
| has a small short or | microphone cables |
| break. | from the mixer until |
|
| the noisy one is found, |
|
| and replace it. |
