EFFECT Knob Settings 10
39
Indicates that the expression pedal controls the parameter.
Indicates FX3 is off.
DIGFX (Digital Sampling Effects)
This effect module emulates the effect that different variations of digital
sampling can have on an audio signal.
Sample Rate Decimation
Lower values indicate lower decimation frequency (more
decimation, more aliasing).
Pedal Sample Rate Decimation
A sample rate decimator effect controlled by the expression pedal.
Bit Reduction
Higher values indicate lower resultant bit depth.
Pedal Bit Reduction
Bit Reduction effect controlled by the expression pedal.
Off
Indicates that DIGFX is off.
LEVEL
In this position, the display shows you the output level of the current program.
Level
Indicates the program output level in 2dB steps, where 25 is unity
gain (0dB). Unity gain is the point at which the level of the output
is the same as the level of the input.
Pedal-Controlled Level
Program level that is controlled by the expression pedal.
10 EFFECT Knob Settings
40
ROUTE
In this position, the display indicates the current signal-routing order of the FX
modules. This ordering can have a big effect on your sound, as each effect in the
configuration feeds into the next. Whatever the configuration, the LEVEL
setting always comes last in line.
This is the default order.
This one is the default order with FX2 and FX3 swapped to put
the delay effects in the middle of the modulation effects.
This order places the cabinet simulator at the end, allowing it to
emulate multiple effects pedals feeding into a cabinet.
This one is order 2 with FX2 and FX3 swapped.
This order is the default order with the compressor/limiter placed
at the end, making this one ideal for recording.
This one is order 4 with FX2 and FX3 swapped.
This is the one to go for if you’re recording and want to sound like
you’re running several effects pedals into a cabinet.
This configuration is order 6 with FX2 and FX3 swapped.